Please use this identifier to cite or link to this item: http://dspace.univ-tiaret.dz:80/handle/123456789/13331
Title: Etude d’un bâtiment en (R+7) à usage multiple
Authors: BOUALEM, Zakaria
BOURAHYA, Abdelkader
Keywords: Bâtiment
BAEL91 modifié 99
RPA99 modifié 2003
ETABS
Issue Date: 21-Jun-2023
Publisher: Université Ibn Khaldoun
Abstract: Ce projet présente une étude détaillée d’un bâtiment à usage d’habitation constitué d'un Rez-de-chaussée plus (07) étages à usage multiple, situé à la wilaya de TIARET. Cette région est classée en zone sismique (I) selon le RPA99 version 2003. En utilisant les nouveaux règlements de calcul et vérifications du béton armé (RPA99V2003 et B.A.E.L91 modifié99), cette étude se compose de quatre parties : La première entame la description générale du projet avec une présentation de caractéristiques des matériaux, ensuite le pré dimensionnement de la structure et enfin la descente des charges. La deuxième partie a pour objectif d'étude des éléments secondaires (poutrelles, escaliers, acrotère, ascenseur, et dalle pleine). L'étude dynamique de la structure a été entamée dans la troisième partie par logiciel ETABS afin de déterminer les différentes sollicitations dues aux chargements (charges permanentes, d'exploitation et charge sismique). En fin l’étude des éléments résistants de la structure (poteaux, poutres, voiles, radier général) sera calculée dans la dernière partie.
Description: This project presents a detailed study of building, consists of ground floor addition (07) floors, located in the wilaya of TIRET This region is classified as seismic zone (I) according to the RPA99 version 2003. Using the new rules of calculation and verification of reinforced concrete (RPA99 2003 version, BAEL91 modifié99), this study consists of four parts: The first starts the general description of the project with a presentation of material properties, then the Pre-design of the structure and finally the descent of the load. The second part aims to study secondary elements (beams, stairs, parapet, elevator, and full slab). The dynamic study of the structure was begun in the third part software ETABS to determine the various stresses due to loads (permanent loads, operational and seismic loading). At the end, the reinforcement of structural elements (columns, beams, walls sails, and raft) will be calculated in the last part.
URI: http://dspace.univ-tiaret.dz:80/handle/123456789/13331
Appears in Collections:Master

Files in This Item:
File Description SizeFormat 
TH.M.GC.2023.44.pdf5,5 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.