Veuillez utiliser cette adresse pour citer ce document : http://dspace.univ-tiaret.dz:80/handle/123456789/11745
Titre: Etude d'un bâtiment en R+7 situé à Tiaret et analyse de ductilité des éléments principaux
Auteur(s): Hemaidia, ahmed
Hassani, oussama
Mots-clés: Bâtiment
BAEL91 modifié 99
ROBOT BAT
RPA99v2003
Date de publication: 4-jui-2019
Editeur: Université Ibn Khaldoun
Résumé: Ce projet présente une étude détaillée d’un bâtiment à usage multiple constitué d'un Rez-de-chaussée plus (7) étages comportant un sous-sol. Le sous-sol a usages parking, R.D.C à usage commercial, et le reste à usage d’habitation, le bâtiment est implanté dans la wilaya de TIARET. L’étude de ce projet est faite en utilisant les règlements de calcul et vérifications du béton armé (B.A.E.L 91 modifié 99) On commence en premier lieu par donner une description détaillée du projet (caractéristiques géométriques, lieu d’implantation…etc.). Ensuite, on cite les différents matériaux utilisés avec leurs caractéristiques et on donne également les différentes hypothèses de calcul. En second lieu, on procède au prédimensionnement des différents éléments de l’ouvrage (Poteaux, Poutres …) et la descente des charges. Par la suite, on détermine le ferraillage des éléments secondaires (escaliers, acrotère, balcon …). Après l’évaluation des efforts sismique selon le RPA99v2003 (grâce au logiciel ROBOT BAT) et l’effort du vent on procède à l’étude des portiques et des voiles. Enfin on fait l’étude de l’infrastructure (voile périphérique et radier général).
Description: This project presents a detailed study of a 7 stories multipurpose building with a basement, the basement for parking and ground floor for commercial use and the 7 remaining stories are for housing, the building is located in the province of TIARET. The study of this project is done according to the codes of calculation and verification of reinforced concrete (BAEL 91modified 99). Firstly, we start by presenting a general description of the project (geometric characteristics, implantation location…), then, we define the different materials utilized in this project and their properties, and we proceed to the Pre-dimensioning of the building’s different elements and assess all loads applied to them. The second part aims to study secondary elements (columns, beams). After evaluating the seismic forces (according to RPA99v2003 using ROBOT BAT) and the wind efforts we proceed to the study of the structural elements (beams, columns, and shear walls) Finally, we move to the study of the infrastructure
URI/URL: http://dspace.univ-tiaret.dz:80/handle/123456789/11745
Collection(s) :Master



Tous les documents dans DSpace sont protégés par copyright, avec tous droits réservés.